← Back to ManikinLab

ManikinLab Terms of Use

Version 2026-11-16 · Effective 16 November 2026

ManikinLab (the "Tool") is provided by D2Bridge LLC, Bothell, Washington, USA ("D2Bridge", "we", "us"). These Terms of Use (the "Terms") are a binding agreement between you and us. You accept them by selecting "Agree and continue" in the Tool. If you use the Tool for an organisation, you confirm that you are authorised to accept these Terms for it, and "you" includes that organisation. If you do not agree, do not use the Tool.

You must be at least 18 years old (or the age of majority where you live) to use the Tool. The Tool is intended for engineers, designers, researchers and students working in design and ergonomics.

1. What the Tool is - and is not

The Tool is a browser-based concept-design aid that generates approximate human-body (manikin) models and related geometry from statistical estimates, for early ergonomic studies of vehicles, cockpits and workplaces.

The Tool is not a validated, certified or approved human model, and its outputs are not engineering, safety, medical or legal advice. Population figures built into the Tool are estimates derived from published summary statistics (sources are listed in the Notices); they are not the original survey data, and the body proportions, postures, reach, grips, fields of view and geometry derived from them are simplified. You must not rely on the Tool or its outputs as the sole or final basis for any design decision, certification, regulatory submission, compliance finding, or anything that affects human health or safety. Before any such use, results must be independently checked by qualified people against licensed anthropometric data and the standards and regulations that apply to your programme. The Tool does not provide medical, health or fitness information about any person.

2. Licence to use

The Tool is currently provided free of charge. Subject to these Terms, we grant you a limited, non-exclusive, non-transferable, non-sublicensable, revocable licence to access and use the Tool, as hosted on our website, for your own design, evaluation, research and educational purposes, including in commercial projects. If we ever introduce fees, we will tell you in advance and you can choose whether to continue.

3. Restrictions

You must not, and must not help anyone else to:

4. Your files and data

The Tool runs in your web browser. The models you configure, the measurements you enter and the files you export (for example STL, OBJ, STEP, PNG and CSV) are created on your device and are not sent to us. You may use, modify and share the files you export, royalty-free and without time limit, for any lawful purpose, including in commercial products, CAD models and documentation, subject to sections 1 and 3. To the extent we have any rights in an exported file, we grant you a perpetual, worldwide, royalty-free licence under them for these purposes. Exported files carry a short notice that they come from a concept-design tool; please keep it when you pass files on unchanged. You are responsible for any data you import into the Tool (for example population files) and for having the right to use it.

5. Standards, data sources and trademarks

The Tool refers to published standards, regulations, surveys and models (for example SAE J1100 and J4004, FAA human-factors guidance and advisory circulars, MIL-STD-1333B, the UMTRI driver posture model, ANSUR II, NHANES and the national statistics listed in the Notices) to identify the basis of its estimates. These references do not imply any affiliation with, or endorsement, review or approval by, their owners or authors. The Tool does not reproduce the text, tables or figures of those documents. MIL-STD-1333B was cancelled in 1996 and is used as reference geometry only. All trademarks and names belong to their respective owners.

6. Our intellectual property

The Tool, including its software, models, data compilations, design and documentation, is owned by D2Bridge or its licensors and is protected by copyright and other intellectual-property laws. Except for the licences in sections 2 and 4, no rights are granted to you. Third-party components are used under their own licences; see the Notices. If you send us feedback or suggestions, we may use them without restriction or obligation to you.

7. Availability, changes and termination

We may change, suspend or discontinue the Tool, or any part of it, at any time. We may update these Terms; the version shown above will change and the Tool will ask you to accept the new version before you continue. We may suspend or end your access if you breach these Terms. Sections 3, 4 (for files already exported), 6 and 8 to 13 continue to apply after your use ends.

8. Disclaimer of warranties

TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE TOOL AND ALL OUTPUTS ARE PROVIDED "AS IS" AND "AS AVAILABLE", WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF ACCURACY, COMPLETENESS, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT AND UNINTERRUPTED OR ERROR-FREE OPERATION. YOU USE THE TOOL AND ITS OUTPUTS AT YOUR OWN RISK.

9. Limitation of liability

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D2BRIDGE AND ITS MEMBERS, MANAGERS, EMPLOYEES AND CONTRACTORS WILL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, OR FOR ANY LOSS OF PROFITS, REVENUE, DATA, GOODWILL OR BUSINESS, ARISING OUT OF OR RELATING TO THE TOOL, ITS OUTPUTS OR THESE TERMS, HOWEVER CAUSED, EVEN IF ADVISED OF THE POSSIBILITY. BECAUSE THE TOOL IS PROVIDED FREE OF CHARGE, OUR TOTAL LIABILITY FOR ALL CLAIMS RELATING TO THE TOOL WILL NOT EXCEED ONE HUNDRED US DOLLARS (USD 100).

Nothing in these Terms excludes or limits liability that cannot be excluded or limited by law, including, where applicable, liability for death or personal injury caused by negligence, for gross negligence, wilful misconduct or fraud, or your statutory rights as a consumer.

10. Indemnity

If you use the Tool for business or professional purposes, then to the extent permitted by law you will defend and indemnify D2Bridge against third-party claims, and the related losses and costs (including reasonable legal fees), arising from your breach of these Terms, or from products, designs or decisions you base on the Tool or its outputs without the independent verification described in section 1. This section does not apply to consumers.

11. Export control and sanctions

The Tool is software provided from the United States and is subject to US export-control and sanctions laws. You may not use, access or export the Tool or its outputs (a) in or to any country or region subject to comprehensive US sanctions or embargoes (currently including Cuba, Iran, North Korea, Syria, and the Crimea, so-called Donetsk People's Republic and Luhansk People's Republic regions of Ukraine), or in or to Russia or Belarus; (b) if you are, or act for, a person on a US, EU or UK restricted-party list; or (c) for any military end use or other purpose prohibited by those laws. By using the Tool you confirm that none of these applies to you. We may block access from restricted locations. You are responsible for complying with the laws that apply to your own use of the Tool and its outputs.

12. Governing law and disputes

These Terms, and any dispute arising out of or relating to them or the Tool, are governed by the laws of the State of Washington, USA, excluding its conflict-of-law rules. The state and federal courts located in King County, Washington have exclusive jurisdiction, and you and we consent to their jurisdiction. If you are a consumer living in the European Union, the United Kingdom or another country whose law gives you the right to bring proceedings where you live, you keep that right and the mandatory consumer protections of that law.

13. General

If any part of these Terms is unenforceable, it will be limited to the minimum extent necessary and the rest remains in effect. Our failure to enforce a right is not a waiver. You may not assign these Terms; we may assign them in connection with a reorganisation, merger or sale of our business. There are no third-party beneficiaries. We are not responsible for failures caused by events beyond our reasonable control. These Terms, with the Privacy notice, are the entire agreement between you and us about the Tool. If these Terms are translated, the English version prevails.

14. Contact

D2Bridge LLC, Bothell, WA 98011, USA · contact via www.d2bridge.com/contact.html

Privacy notice · Third-party notices